RESUMO Protium heptaphyllum é encontrada na região amazônica, em vários estados do Brasil e países da América do Sul. Conhecida como almecega produz uma resina oleosa usada na medicina popular como analgésica, antiinflamatória, cicatrizante e expectorante, é rica em triterpenos pentaciclicos e óleo essencial. O objetivo principal do presente trabalho foi analisar a composição química do óleo essencial da resina P. heptaphyllum (OEPh) em diferentes tempo de extração e avaliarsuaatividade antifúngica contra espécies de Candida, isoladas de horticultores com onicomicoses, por método de disco-difusão. O OEPh foi obtido por hidrodestilação, analisado por Cromatografia Gasosa Multidimensinal Acoplada a Espectrometria de Massas (MDGC/MS). As espécies de Candida foram obtidas de lesões nas unhas de horticultores de uma horta comunitária na cidade de Teresina, Piauí, Brasil. Testou-se a atividade antifúngica do OEPhnas concentrações de 1000 μg/L, 500 μg/L e 250 μg/L, protocolo M44-A2 (CLSI 2009). Os principais constituintes identificados foram l- limoneno, α-terpineol, p-cineol, o-cimeno e α-felandreno, entretanto, sua composição varia significativamente em decorrência do tempo de extração. Todas as espécies, exceto a C. rugosa, foram inibidas com halo ( Χ ≥ 14 mm) na concentração de 1000 μg/L. C. krusei é naturalmente resistente ao fármaco fluconazol, mas quando testado com OEPh,a espécie clínico (caso 9) demonstrou sensibilidade nas três diluições (halo Χ ≤ 10 ≥ 14) e a cepa padrão foi inibida na concentração de 1000 μg/L (halo Χ 14mm). Fato semelhante também ocorreu com a cepa padrão de C. parapsilosis (halo Χ ≥ 11mm). O OEPh possui atividade antifúngica considerável, merecendo uma investigação mais aprofundada para aplicações clínicas alternativas, uma vez que esta espécie é amplamente distribuída em nossa comunidade, apresenta bom rendimento e, ainda, aplicações terapêuticas importantes.

ABSTRACT Protium heptaphyllum is found in the Amazon region, and in various Brazilian states and South American countries. Also Known as almecega, it produces an oil resin used in traditional medicine as analgesic, anti-inflammatory, cicatrizant and expectorant, it is rich in pentacyclic triterpenes and essential oil. The main objective of this study was to analyze the chemical composition of P. heptaphyllumresin (OEPh) over different extraction times and to evaluate their antifungal activity against Candida species, obtained from gardeners with onychomycosis, using the disk diffusion method. The OEPh was obtained by hydrodistillation and analyzed by Multidimensional Gas Chromatography coupled with Mass Spectrometry (MDGC / MS). Candida species were obtained from lesions on the nails of horticulturist from a community garden in the city of Teresina, Piauí, Brazil. The antifungal activity in concentrations of 1000 µg/L, 500 µg/L and 250 µg/L, PROTOCOL M44-A2 (CLSI 2009) OEPh was tested. The main constituents identified were: l-limonene, α-terpineol, p-cineol, o-cymene and α-phellandrene, however, its composition varies significantly with extraction time. All species, except C. rugosa, were inhibited with halo (≥ 14 mm) at 1000 μg / L. C. krusei is naturally resistant to the drug fluconazole, but when tested with OEPh the clinical species (case 9) demonstrated sensitivity in three dilutions (halo ≤ 10 ≥ 14) and the standard strain was inhibited at concentration of 1000 μg/Lg / L (halo 14mm). A similar situation also occurred with the standard strain of C. parapsilosis (halo ≥ 11mm). OEPh has considerable antifungal activity, which merits further investigation for alternative clinical applications, since this species is widely distributed in our community, and it presents good yields, and also has important therapeutic applications.

The corrosion inhibition characteristics of nitrogen containing amino acid L-tryptophan on mild steel in 0.1 M HCl solution, in the temperature range of 30-50 °C, was studied by weight loss and potentiodynamic polarization measurements. L-tryptophan significantly reduces the corrosion rates of mild steel; the maximum inhibition efficiency being 83% at 50 °C in presence of inhibitor concentration of 500 ppm. The effect of the addition of very small concentrations of anionic surfactant, sodium dodecyl sulfate (SDS), and of cationic surfactant, cetyl trimethyl ammonium bromide (CTAB), on the corrosion inhibition behavior of L-tryptophan was also studied. The inhibition efficiency (IE) of L-tryptophan significantly improved in presence of both surfactants. The effect of SDS and CTAB on the corrosion inhibition behavior of L-tryptophan appears to be synergistic in nature, the values of synergism parameter being greater than unity. The adsorption of inhibitors on mild steel surface obeyed Langmuir's adsorption isotherm. The calculated thermodynamic parameters for adsorption reveal a strong interaction between the inhibitors and the mild steel surface. The results obtained by electrochemical studies are consistent with the results of the weight loss measurements. L-tryptophan acts more anodic than cathodic inhibitor.

The emeraldine base (EB) was synthesized by chemically oxidative polymerization using ammonium persulphate as an oxidant in hydrochloride aqueous medium. The polymer was chemically deposited on mild steel specimens using tetra methyl urea (TMU) as solvent through solvent evaporation method. The coating of polypyrrole (PPy) on carbon steel was deposited by chemical polymerization. A bi-layered polymer coating comprising of inner coat of PPy with top coat of EB (PPy/EB) was also deposited on mild steel following identical procedure. The deposited EB, PPy and PPy/EB coatings were characterized by Fourier Transform Infrared (FTIR) Spectroscopy and Scanning Electron Microscopy (SEM). The anticorrosive properties of single and bi-layered coatings was investigated in major corrosive environments such as 0.1 M HCl, 5% NaCl solution, artificial seawater, distilled water, tap water and open atmosphere by conducting various corrosion tests which include: immersion test, open circuit potential measurements, potentiodynamic polarization measurements, and atmospheric exposure test. The results of immersion tests showed that the PPy/EB coating gave best protection in all media under investigation, the protection efficiency being in the range of 72 to 79% after 30 days of immersion. The result of OCP measurements showed significant positive shift in the corrosion potential for single as well as bi-layered coatings in all corrosive medium under investigation; the bi-layered coating showing more positive corrosion potential. The potentiodynamic polarization studies also confirmed lower corrosion rates for PPy/EB coating than the single polymer coatings.

The present paper contains the results relative to the reaction of NiO with Na2SO4 in presence of SO2 (g) at 1100 and 1200 K. Nickel oxide (NiO) is produced by the oxidation of metal alloys in many industrial operations. The oxidation of metal and metal oxides in presence of molten salts and gas environment at high temperature is often called as hot corrosion. In this investigation the studies have been carried out taking into consideration the influence of SO2 partial pressure. The thermo-gravimetric studies have been carried out as a function of Na2SO4 concentration in the mixture. The reaction products identified by XRD analysis and surface morphologies of the products were discussed on the basis of metallographic and scanning electron microscopic (SEM) studies. The pH of the aqueous solutions of the reaction products were measured to observe the changes in the system with varying the Na2SO4 concentration. A quantitative estimation of soluble metal ions has also been carried out with the help of an atomic absorption spectrophotometer. The possibility of chemical reaction is established by thermodynamic calculations of free energies of the reaction products.